Showing 1–12 of 21 results
-
₹499.00 Excl. of GST
Mounting Position : DIN Rail / Mounting Screw MAX Current Rating : AC3: 09A (Normal Inductive Load Current) Coil Insulation : 690V Coil Voltage : 220VAC Model : 3P-NXC-09 -
₹2,250.00 – ₹2,750.00 Excl. of GST
Inlet / Outlet: 1″ BSPM Valve Type: Normally Closed (1.0 to 10 bar) Operating Voltage: 12VDC/ 24DC/ 24VAC/ 230VAC Manual Over ride: Yes Flow Controller: Yes Bleeding valve:
Yes -
₹425.00 – ₹500.00 Excl. of GST
- Inlet / Outlet: 1/2″ BSPM
- Mounting: Bottom Mounting
- Flow Rate: 30 LPM / 1800 LPH
- Inlet Filter: Encapsulated SS mesh, 0.45 mm
- Valve Type: Normally Closed (0.2 to 8 bar)
- Operating Voltage: Normally Closed 12VDC / 24DC / 48VDC / 230VAC
-
₹425.00 – ₹500.00 Excl. of GST
- Inlet / Outlet: 1/4″ BSPF
- Mounting: Bottom Mounting
- Flow Rate: 6 LPM / 360 LPH
- Inlet Filter: Not Available
- Valve Type: Normally Closed (0.2 to 8 bar)
- Operating Voltage: Normally Closed 12VDC / 24DC / 48VDC / 230VAC
-
₹350.00 Excl. of GST
Mounting Position : Vertical, Horizontal, Tabletop MAX Current Rating : AC1: 16A (Resistive Load Current)
: AC3: 12A (Normal Inductive Load Current)Coil Voltage : 24VAC Model : DP-16SW-24VAC -
₹300.00 Excl. of GST
Mounting Position : Vertical, Horizontal, Tabletop MAX Current Rating : AC1: 16A (Resistive Load Current)
: AC3: 12A (Normal Inductive Load Current)Coil Voltage : 240VAC Model : DP-16SW -
₹599.00 Excl. of GST
Mounting Position : DIN Rail / Mounting Screw MAX Current Rating : AC3: 16A (Normal Inductive Load Current) Coil Insulation : 690V Coil Voltage : 220VAC Model : 3P-NXC-18 -
₹250.00 – ₹575.00 Excl. of GST
- Lever Lock Connector Is Wire connector
- Each contact point at the film independent, wire diameter can also be different, safe short-circuit.
- Suitable for 0.08-2.5(4.0)mm² Hard conductors and soft conductors
- Terminal Block Is Incredibly Easy To Use, Compact, Reusable, And Requires No Tools
- 5Nos of ET25 Wire Connectors of the Type 2PIN / 3PIN / 5PIN
-
₹125.00 Excl. of GST
- 3 Way Through Connector
- Voltage:<250V
- Electricity:<10A
- Insulation material:PE & PP
- Wire range: 0.5 ~ 3.5 mm^2
- Temperature: -40℃ ~ 150℃
-
₹450.00 Excl. of GST
Mounting Position : Vertical, Horizontal, Tabletop MAX Current Rating : AC1: 40A (Resistive Load Current)
: AC3: 32A (Normal Inductive Load Current)Coil Voltage : 240VAC Model : DP-40SW -
₹100.00 Excl. of GST
- Female Spade Terminal Connector with Insulator
- Fit Stud Width : 6.3mm / 1/4″;
- Total Size : 18 x 7 x 5mm / 0.7″ x 0.3″ x 0.2″(LWH)
- Fit Cable Diameter : 3mm/ 0.12″
- Package Content : 10 x Female Spade Terminal Connector with Insulator Boot.
-
₹1,000.00 – ₹1,500.00 Excl. of GST
- Fit for various control boxes, cabinets, power distribution meter box
- Non-corrosive, anti-static, insulation resistance
- High quality, durable, easy install
- IP65, ABS Boxes
